Viewing Window With Manually Controlled Wiper Blowing Sand and Dust Testing Chamber
Viewing Window With Manually Controlled Wiper Blowing Sand and Dust Testing Chamber are ideally designed for the simulation of Dust and Sand conditions in a controlled atmosphere. Blowing sand chambers are used in particular for evaluating the effects of dust-laden environments based on the below standards. Blowing Dust chambers are widely used in several industries and applications such as for Military & Defense, Automotive, Computer Systems, Optics and Displays, Material, Coatings, Solar Energy, etc.
In general, these chambers are made to perform per the following standards:
IEC-600529
DIN-40050 IP5X & IP6X,
SAE-J575
ISO-20653
IEC-60068-2-68
Mil-Std 810F
Please specify the correct standards when requesting information on the various Dust Chambers available from Mentek Solutions.
Standard
MIL STD 810F Method 510.4 Para 4.4.3- Procedure II - BLOWING SAND
Features
- Temperature Control & Display Unit
- Humidity Control & Display Unit
- Wind Speed Control & Display Unit
- Dust Concentration Control & Display Unit
- Data Monitoring & Recording for Temperature, Humidity, Wind and Dust Concentration. Data can be monitored and recorded in real time. This saved data can be later displayed and printed.
- High pressure circle air fan & Wind speed generator attached with wind speed adjustor.
- Dust Adjustment Device to adjust dust volume
- Automatic dry air handling system (does not include compressed air)
Technical Sheet
| Model | MSDT-512 | MSDT-800 | MSDT-1000 | MSDT-1500 |
| Dimension(cm) | 800*800H*800 | 800*1000H*100 | 1000*1000H*1000 | 1000*1500H*1000 |
| Inside Chamber Temperature | RT + 10 ℃ -80 ℃ adjustable |
| Temperature uniformity | ≤±3℃ |
| Inside Chamber Humidity | ≤30%R.H |
| Test Components | Content of 97-99% of silica (angular silica powder) |
| Settling/Dust size | 75% is 45um, 15% is 75um, 8% is 106um and 2% is 150um |
| Spray method | 10.6±7g/m3 |
| Settling/Dust Concentration | 8.9m/s±1.2m/s |
| Air velocity | Timing automatic control. Time control accuracy of 1min |
| Time controll | Stainless steel with internal steel pipe connection |
The biggest advantage with MTENK climatic chambers is that they are highly flexible for customization. Every test follows a set of procedures as per the defined test standards (ASTM, IEC, MIL, etc.) and sometimes a standard climatic chamber might not be sufficient to conduct a particular test. Our engineers understand this need of the industry well and offer the highest level of customisation like design modification or integration with other applications such as Climatic Chamber with alititude integration, Climatic Chamber with Vibration Integration(AGREE Chamber), etc.
Product Tags:
|
|
Window Manual Control Sand Testing Equipment , Dust Testing Chamber Wiper Blowing Images
|
